APEX+ 5W-40 LONG LIFE (APX5W40D2)

Nulon APEX+, with Advanced Fluid Dynamics, dramatically improves engine oil flow efficiency to reduce power-robbing friction and maximise engine performance when you need it. Responding to driving inputs, Nulon APEX+ flows faster at low temperatures and resists extreme pressure, heat and wear of contacting metal surfaces to promote ultimate performance, fuel efficiency and protection in both everyday stop/start and the most demanding driving conditions.

Nulon APEX+ 5W-40 Long Life engine oil is a General Motors dexos2® license approved formula designed to provide ultimate performance and protection for all technically advanced passenger car and light commercial petrol and diesel engines, including vehicles fitted with Diesel Particulate Filters (DPFs).

Benefits:

  • Ultimate protection for modern car and light commercial diesel engines
  • Low viscosity ensures maximum fuel e­fficiency
  • dexos2® license approved D225GCDB075
  • Recommended for modern diesels fitted with Diesel Particulate Filters (DPFs)
  • Provides excellent cold start-up protection
  • Fast flowing, low viscosity formula
  • Provides excellent engine cleanliness
  • Provides excellent oxidation control and thermal stability
  • Oil stays in-spec during long oil drain intervals

Pack sizes

7L
APX5W40D2-7 APX5W40D2-7-rear

Meets or exceeds the following oil industry specifications:

GM dexos2® approved license D225GCDB075
Porsche A40
MERCEDES-BENZ 229.31/226.5
Renault RN0700/RN0710

 

Suitable for use in the following vehicle manufacturers:

Alfa Romeo Mercedes
Chrysler Mitsubishi
Citroen Nissan
Holden Peugeot
Hyundai Porsche
Jaguar Renault
Jeep Subaru
Kia Suzuki
Land Rover Toyota

NOTE: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubrication requirements and service intervals.

SAFETY: Avoid skin contact with used product. If skin contact occurs, wash area thoroughly with soap and water. For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).

ENVIRONMENT: Do not pollute drains, soil or water with used products. After use, dispose of container in a responsible manner. Do not dispose of to landfill. Disposal of container should comply with local council regulations.

SDS: Additional information is listed in the Safety Data Sheet at nulon.com.au

Typical Characteristics

SAE Grade 5W-40
Kinematic Viscosity @ 100 Deg C 13.5 typ.
Viscosity Index > 170
Density @ 15 Deg C 0.85
High Temperature High Shear (HTHS) > 2.9

Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.

Industry Specifications

Industry group Specifications
European Constructors (ACEA) C3
Society of Automotive Engineers (SAE) 5W-40
American Petroleum Institute (API) SN/CF

Product reviews

Loading comment... The comment will be refreshed after 00:00.

Be the first to comment.

Add a review
Write comments...
You are a guest
or post as a guest

FAQs

Can’t find the answer you are looking for? Ask a question