Semi Synthetic 75W-90 Smooth Shift Manual Gearbox & Transaxle Oil (SS75W90)

Nulon Semi Synthetic 75W-90 Smooth Shift Manual Gearbox & Transaxle Oil (SS75W90) is an extreme pressure API GL-5 semi-synthetic hypoid gear oil that provides superior wear protection. Ideal for use in transaxles with combined manual gearbox and hypoid differential. For use in passenger cars and light commercial vehicles. Suitable for towing and 4x4 operation.

Nulon SS75W90 is optimized using the synergy of synthetic and high quality mineral base fluids for use in manual gearbox and transaxle oil. SS75W90 is engineered with superior additive technology to enhance wear protection, oxidation stability, corrosion protection, and low temperature characteristics.

SS75W90 is suitable for use where high operating temperature, high speed or low speed &  high load conditions exist . It provides anti-scoring properties for components that experience heavy duty conditions. It is fortified with anti-oxidant inhibitor to prolong the oil life and prevent sludge build up and varnish formation.

Nulon SS75W90 can be used as a substitute for SAE 80W-90 or SAE 90 viscosity oil for gearboxes that are experiencing gear shift problems or are notchy when cold.

For enhanced anti-wear performance use Nulon Smooth Shift Manual Gearbox & Diff Treatment. Part No: G70.

Pack sizes

1L
2.5L
SS75W90-1E SS75W90-2.5
  • Reduces gearshift baulking in cold temperatures
  • Excellent wear protection
  • High temperature stability
  • Superior oil film strength
  • Good corrosion protection and rust prevention for longer component life
  • Longer service life
  • Excellent seal compatibility to prevent leakage
  • Excellent antioxidant to prevent sludge build up and varnish formation
  • Transaxle with combined manual gearbox and hypoid differentials where API GL-5 is recommended
  • Passenger cars, towing vehicles, 4x4, light commercial vehicles
  • Manual gearbox and conventional differentials

Avoid prolonged skin contact with used oils. Wear suitable gloves. If skin contact occurs wash immediately with soap and water. Prolonged and repeated contact with used oils may cause skin cancer. Protect the environment. Do not pollute drains, ground or water with used oils. Dispose of container as per local EPA guidelines. Do not use this container for fuel or solvents.

Typical Characteristics

Typical Characteristics SS75W90
SAE Viscosity Grade 75W-90
KV @ 100°C, cSt 16.35
KV @ 40°C, cSt 112.3
Viscosity Index 157
Density @ 15°C, g/mL 0.8895
Pour Point, °C 42

Due to continued product research and development, the information contained in this Product Bulletin is subject to change without notification

Industry Specifications

Industry group Specifications
BTR 5M-50
GM HN 1181
GM HN 2013
US Military MIL-L-2105 C
US Military MIL-L-2105 D
Holden VN V6/V8 T5 manual gearbox
US Military MIL-L-2105 B

Product reviews

Loading comment... The comment will be refreshed after 00:00.

Be the first to comment.

Add a review
Write comments...
You are a guest
or post as a guest