Semi Synthetic Multi-Vehicle Automatic Transmission Fluid (NATF)

Nulon Semi Synthetic Multi-Vehicle Automatic Transmission Fluid (NATF) is a Multi-Vehicle Automatic Transmission Fluid designed with semi synthetic base fluids and enhanced fluid technology to improve automatic transmission performance, durability, and smooth shifting.

Nulon NATF uses the latest Automatic Transmission Fluid technology that is suitable for many manufacturer requirements such as Mercon®, Dexron® III, Allison C-4, Caterpillar TO-2 and many others. This enhanced fluid technology has superior wear protection, and improved thermal and oxidation stability to maintain transmission durability and consistent performance.

 

Pack sizes

4L
NATF-4 NATF-4-rear
  • Excellent oxidation resistance and improved cleanliness for long life and fluid durability
  • Superior anti wear performance to protect the transmission
  • Improves sludge and varnish control
  • Excellent low temperature and anti-shudder properties for improved shifting and drivability
  • Fortified anti corrosion properties for transmission durability
  • Enhanced foam inhibition to prevent wear caused by oil aeration or foaming
  • Improved seal protection to suit most seals

* For higher level performance & heavy duty protection, upgrade to Nulon Full Synthetic Multi-Vehicle Automatic Transmission Fluid (SYNATF)

  • Automatic transmission that requires Mercon®, Dexron® III, Allison C-4, and Caterpillar TO-2 performance
  • Toyota automatic transmission that requires Toyota T-II performance
  • Ford Fairlane and Falcon with 4-speed automatic transmission
  • Mitsubishi, Kia, and Hyundai automatic transmission
  • Mazda transmission that requires M-III ATF
  • Four-speed automatic transmission
  • Nissan Automatic transmission
Typical Characteristics:NATF
KV @ 100°C, cSt 7.000
KV @ 40°C, cSt 33.80
Viscosity Index 175
Density @ 15°C, g/mL 0.8609
Pour Point, °C -39

Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.

Avoid prolonged skin contact with used oils. Wear suitable gloves. If skin contact occurs wash immediately with soap and water. Prolonged and repeated contact with used oils may cause skin cancer. Protect the environment. Do not pollute drains, ground or water with used oils. Dispose of container as per local EPA guidelines. Do not use this container for fuel or solvents.

Industry Specifications

Industry group Specifications
BTR 85LE, 91LE
BTR 5M-44
BTR 5M-52
Chrysler ATF +2/+3
Ford MERCON®
Ford TQ95
GM DEXRON® II D/E
GM DEXRON® III F/G/H
GM HN 2126
GM HN 2287
GM GM 6297M
Honda pre 2000
Hyundai/Kia SP/SPII
Mazda M-III
Mercedes Benz 236.1
Mercedes Benz 236.5
Mercedes Benz 236.6
Mercedes Benz 236.7
Mitsubishi SPII/III
Nissan Matic C/D
Subaru pre 2003
Toyota T/T-II

Product reviews

Loading comment... The comment will be refreshed after 00:00.

Be the first to comment.

Add a review
Write comments...
You are a guest
or post as a guest