Full Synthetic 75W-85 Smooth Shift Manual Gearbox and Transaxle Oil

Nulon SYN75W85 is an extreme pressure API GL-4 fully synthetic gear oil, with superior high temperature stability when compared to conventional mineral gear oils. Ideal for use in transaxle applications with combined manual gearbox and differential.

Nulon SYN75W85 is formulated using hydrofinished base fluids with superior additive packages to enhance wear protection, corrosion protection, seal compatibility and low temperature characteristics. The optimized formulation has optimum oxidation and thermal stability to ensure fluid durability and performance during its life time.

The hydrofinished base oils used in SYN75W85 are Very High Viscosity Index (VHVI) base fluids that have advantages of low volatility for better oil consumption, low wax content for improved low temperature fluidity, high saturates level for excellent thermal and oxidation stability, and low sulfur and aromatic compounds for better environment friendliness.

Nulon SYN75W85 is designed mainly for manual transmission and transaxle application where API GL-4 is recommended. It is intended for use in axles with spiral bevel gears under moderate to severe speed and load conditions. It can also be used for axles with hypoid gears under moderate speeds and load conditions. Nulon SYN75W85 may be used in selected manual transmission and transaxle application where API MT-1 lubricants are not suitable.

Benefits and Features

• Reduces gearshift baulking in cold temperatures
• Excellent wear reduction and good friction behaviour
• High thermal and oxidation stability for longer oil life
• Superior oil film strength for excellent protection
• Better low temperature performance
• High viscosity index for better performance at high operating temperature
• Good corrosion protection and rust prevention for longer component life

Health and Safety

Avoid prolonged skin contact with used oils. Wear suitable gloves. If skin contact occurs wash immediately with soap and water. Prolonged and repeated contact with used oils may cause skin cancer. Protect the environment. Do not pollute drains, ground or water with used oils. Dispose of container as per local EPA guidelines. Do not use this container for fuel or solvents.

Typical Characteristics

Due to continued product research and development, the information contained in this Product Bulletin is subject to change without notification

Health and Safety

Avoid prolonged skin contact with used oils. During handling, wear suitable gloves and wash hands thoroughly after use. Dispose of container properly as per EPA guidelines. This container is not suitable for fuel or solvents.

Approvals and specifications

Suitable for use where these following specifications are required:

Packaging:

• Part No: SYN75W85-1 - 1 Litre bottle 6 bottles per carton 
• Part No: SYN75W85-4 - 4 Litre bottle 3 bottles per carton
• Part No. SYN75W85-20 - 20 litre drum - single unit